Scanning acoustic force microscope measurements on grating-like electrodes
Applied Physics A Materials Science & Processing 61:3 (1995) 237-242
Abstract:
Grating-like metal electrodes supplied with high- and low-frequency voltages were investigated by a Scanning Acoustic Force Microscope (SAFM). On piezoelectric LiNbO3, these electrodes form an interdigital transducer which generates surface acoustic waves according to the charge distribution on its electrodes when excited at a transducer's passband frequency. The influence of surface deformation and of surface charges on the cantilever deflection of the SAFM in contact and non-contact mode was systematically studied. Comparing the images of the electrodes which were prepared on piezoelectric and dielectric substrates, surface deformation and charge distributions were qualitatively separated. © 1995 Springer-Verlag.Probing of oscillating surfaces by a scanning acoustic tunneling microscope
Thin Solid Films 264:2 (1995) 226-229
Abstract:
The scanning acoustic tunneling microscope (SATM) which is based on a scanning tunneling microscope, is capable of detecting the amplitude and the phase of high-frequency surface acoustic waves (SAWs) as well as the surface topography. For our experiments the SAWs have been excited by interdigital transducers on YZ-LiNbO3 samples. A thin gold film with a thickness of about 100 nm has been deposited on its surface. The read-out of the high-frequency acoustic wave field is performed by a mixing technique. Owing to the non-linear dependence of the tunneling current on the tip-to-sample distance an additional slightly-shifted high-frequency modulation of the gap voltage leads to an increase of the d.c. tunneling current and to a low frequency signal at the difference frequency. The a.c. tunneling current contains the information on the elastic properties of the solid. Thin films deposited on the surface cause a dispersion of the phase velocity, which then reveals the elastic parameters. By measuring the phase and the amplitude of an acoustic wave field with high spatial resolution the SATM technique allows the mapping of the acoustic wave field and thereby the investigation of the elastic properties of thin films. © 1995.Messungen an Interdigitalwandlern mit dem akustischen Kraftmikroskop
Fortschritte der Akustik - DAGA95 DEGA (1995) 731-734
Scanning microprobe techniques for high resolution measurements of surface acoustic waves
Proceedings of the 1995 World Congress on Ultrasonics (1995) 395-398
Scanning acoustic force microscope detection of SAWs
Proceedings of the IEEE Ultrasonics Symposium 1 (1994) 363-366