Spin-polarized electronic reflections at metal-oxide interfaces
J MAGN MAGN MATER 240:1-3 (2002) 140-142
Abstract:
The ultra-thin oxide tunnel barrier employed in magnetic tunnel junctions stack has to be of very high quality in terms of large scale homogeneity of its thickness and height parameters. For controlling precisely oxidation kinetic, we used spin valves as an oxidation progress probe. By measuring the magnetoresistance effect versus the oxidation time we are able to detect under- or over-oxidation of the metallic material. This technique consists of analysing the ability of spin-dependent electron scattering at metal/oxide interfaces. (C) 2002 Elsevier Science B.V. All rights reserved.Comparative study of spin injection into metals and semiconductors
JOURNAL OF PHYSICS D-APPLIED PHYSICS 35:3 (2002) PII S0022-3727(02)30114-1
Frequency domain magnetic measurements from Kilohertz to Gigahertz
TOP APPL PHYS 83 (2002) 217-243
Abstract:
This review deals with practical aspects of making frequency-domain measurements of magnetic susceptibility and magnetic losses from 200 kHz up to 10 GHz. It sets out the types of measurement concerned, distinguishing resonant from nonresonant phenomena. The techniques available are categorized according to suitability for the different frequency regimes and types of investigation. Practical recipes are provided for undertaking such experiments across the entire frequency range. Marginal oscillator spectrometry is discussed which is applicable across the whole frequency range. Different instruments are presented, and particular emphasis is placed on designs which function on the Robinson principle. Analysis of oscillation condition and signal-to-noise performance is dealt with, also sample considerations such as filling factor. Practical circuits are presented and their merits and demerits evaluated. Layout and radio-frequency design considerations are dealt with. Ultrahigh/microwave frequency marginal oscillator spectrometry is given special treatment and several practical designs are given. The essentials of good microwave design are emphasized. A general discussion of resonant structures is included which treats multiple layer coil design, slow wave line structures, stripline and cavities. Unusual cavity designs such as the rhumbatron are treated. Use of striplines with microwave marginal spectrometry is described and compared with conventional network-analysis techniques. The use of parameter matrices for high-frequency analysis is alluded to. Some details of good construction practice are given together with some practical considerations relating to skin depth and other high-frequency phenomena.Liquid sensor
(2002)
Abstract:
An integrated contactless radiofrequency sensor using MESFET circuitry with a miniature resonator is capable of sensing homogenous and heterogeneous liquids. Examples include detection of liquid drop size and velocity, and sensing of heterogeneous mixtures such as slurries or oil and water, …Spin electronics - a review
JOURNAL OF PHYSICS D-APPLIED PHYSICS 35:18 (2002) PII S0022-3727(02)88955-0