Thick C60:ZnPc bulk heterojunction solar cells with improved performance by film deposition on heated substrates
Applied Physics Letters 94:25 (2009)
Abstract:
We study the influence of different substrate temperatures during the deposition of the ZnPc: C blend layer in bulk heterojunction organic solar cells. It is shown that substrate heating during evaporation leads to a significant improvement in the solar cell performance mainly due to an increase in photocurrent and fill factor (FF). This is attributed to improved morphology resulting in better charge carrier percolation pathways within the ZnPc: C blend, leading to reduced transport losses. Using this method, blend layer thicknesses of 150 nm are possible without loss in FF, which requires a three-dimensional interpenetrating network without isolated clusters. When heating the substrate up to 110 °C, an efficiency of 2.56% is achieved compared to 1.59% for an identical device prepared at room temperature. © 2009 American Institute of Physics.Light trapping in organic solar cells
Physica Status Solidi (A) Applications and Materials Science 205:12 (2008) 2862-2874
Abstract:
One key problem in optimizing organic solar cells is to maximize the absorption of incident light and to keep the charge carrier transport paths as short as possible in order to minimize recombination losses during the charge carrier extraction. The large versatility of organic semiconductors and compositions requires specific optimization of each system. Due to the small thickness of the functional layers in the order of several ten nanometres, coherent optics has to be considered and therefore interference effects play a dominant role. Here we present and discuss concepts for light trapping in organic solar cells. These are wide gap layers in planar solar cells, folded solar cell architectures benefiting from the illumination under inclined incident angles and multiple reflections and absorptions as well as diffraction gratings embossed into the photoactive layer. © 2008 WILEY-VCH Verlag GmbH & Co. KGaA.High throughput testing platform for organic solar cells
Progress in Photovoltaics: Research and Applications 16:7 (2008) 561-576
Abstract:
In this paper we present a high throughput testing setup for organic solar cells that is necessary for an efficient analysis of their behaviour. The setup comprises process parameter logging, automated measurement data acquisition and subsequent data management and analysis. Utilising this setup the reproducibitity of solar cells and the effect of production parameter variations has been tested with a set of 360 solar cells based on thepoly-3- hexylthiophene:1-(3-methoxycarbonyl)-propyl-1-1-phenyl-(6,6)C61 bulk heterojunction. Variations in power conversion efficiency between 1 and 3% were observed on varying production parameters hardly mentioned in literature. The conditions during the vacuum deposition of the aluminium cathode turned out to have a significant effect. The key solar cell parameter affecting the performance was the fill factor (FF). As such the work exemplifies the necessity for a combined approach to analyse the complex behaviour of organic solar cells. The developed high throughput testing setup provides a basis for an efficient testing of production parameter variations and materials and additionally opens the door for statistical analysis. Copyright © 2008 John Wiley & Sons, Ltd.Dicyanovinyl-quinquethiophenes with varying alkyl chain lengths: Investigation of their performance in organic devices
Journal of Applied Physics 104:7 (2008)
Abstract:
We compare between two derivatives of dicyanovinyl-quinquethiophenes with different alkyl side chain lengths. Both materials show comparable open circuit voltages Voc in organic solar cells with fullerene C60 as acceptor, as expected since they have the same highest occupied molecular orbital energy. However, differences in the current-voltage-characteristics, particularly in the fill factor, are observed. We analyze both derivatives in hole-only devices and find a difference in the hole injection between the doped hole transport layer and the oligothiophenes. Additionally, we determine the hole mobility of the two materials and explain the different behaviors of the two materials in solar cells. © 2008 American Institute of Physics.Small-molecule solar cells-status and perspectives.
Nanotechnology 19:42 (2008) 424001