A nonlinear transmission line model for simulating distributed SIS frequency multipliers
IEEE Transactions on Terahertz Science and Technology IEEE 10:3 (2020) 246-255
Abstract:
Superconductor/Insulator/Superconductor (SIS) junctions have extremely nonlinear electrical properties, which makes them ideal for a variety of applications, including heterodyne mixing and frequency multiplication. With SIS mixers, the SIS junctions normally have circular cross-sections, but they can also be fabricated in the form of microstrip transmission lines, known as distributed SIS junctions (DSJs). By using a DSJ as an open-circuit stub, it is possible to create a large SIS junction with a low effective input reactance. This is beneficial for SIS frequency multipliers because their output power is proportional to the area of the junction. It is challenging, however, to simulate the behavior of DSJs because (a) they have to be modeled as transmission lines and (b) the model has to take into account the quasiparticle tunneling current, which is a nonlinear function of the AC voltage. In this paper, we present a new nonlinear transmission line model to accurately describe the behavior of DSJs and to simulate the performance of distributed SIS frequency multipliers (DSMs). This model is compared to experimental data from a recent DSM device and good agreement is found between the DC tunneling currents and the output powers at the second harmonic. Based on this success, an improved DSM design is proposed that has a higher output power and a higher conversion efficiency than previous designs.A new concept for multi-beam phased array
2019 12th UK-Europe-China Workshop on Millimeter Waves and Terahertz Technologies (UCMMT) Institute of Electrical and Electronics Engineers (2020) 1-4
Abstract:
We present a new concept for constructing a compact linear 1 × n multi-beam phased array transceiver system that can be scaled to operate from radio to millimetre wavelength. In this design, all the components required to form the phased array are fabricated on a single printed circuit board, where both the input antenna array and the readout arrays are integrated on the same platform. This is made possible by using a novel planar power splitter/combiners technology, which allows the input signal from each antenna to be split simultaneously through these components arranged in horizontal, and re-combined vertically to form individual beam. This compact single-platform phased array system could be important for many applications that required compact and light-weight design such as 4G/5G wireless telecommunications, inter-satellite (CubeSat) or satellite-base station communication links, space-based remote sensing, vehicle transceiver system and astronomical receivers.Simulating the behavior of a 230-GHz SIS mixer using multitone spectral domain analysis
IEEE Transactions on Terahertz Science and Technology Institute of Electrical and Electronics Engineers 9:6 (2019) 540-548
Abstract:
We present a new software package, called QMix, for simulating the behavior of superconductor/insulator/ superconductor (SIS) mixers. The software uses a harmonic balance procedure to calculate the ac voltage across the SIS junction and multitone spectral domain analysis to calculate the quasiparticle tunneling currents. This approach has two major advantages over other simulation techniques: 1) it can include an arbitrary number of higher order harmonics, and 2) it can simulate the effect of multiple strong nonharmonic frequencies. This allows the QMix software to simulate a wide range of SIS mixer operation, including the effects of harmonics in the local-oscillator (LO) signal and gain saturation with respect to the RF signal power. In this article, we compare the simulated results from QMix to the measured performance of a 230-GHz SIS device, both to validate the software and to investigate the experimental data. To begin, we simulated the conversion gain of the mixer and we found excellent agreement with the experimental results. We were also able to recreate the broken photon step effect by adding higher and lower order harmonics to the LO signal. We then simulated a range of incident RF signal powers in order to calculate the gain saturation point. This is an important metric for SIS mixers because we require linear gain for reliable measurements and calibration. In the simulated results, we found both gain compression and gain expansion, which is consistent with other studies. Overall, these examples demonstrate that QMix is a powerful software package that will allow researchers to simulate the performance of SIS mixers, investigate experimental results, and optimize mixer operation. We have made all of the QMix software open-source and we invite others to contribute to the project.A slotline DC block for microwave, millimetre and sub-millimetre circuits
IEEE Microwave and Wireless Components Letters Institute of Electrical and Electronics Engineers 29:9 (2019) 583-585
Abstract:
DC blocks are used frequently in planar circuits to enable separate DC voltage/current biasing of active components inserted along the transmission lines. In this Letter, we present a slotline DC block design where the conductors of the transmission line can be physically broken, while allowing the propagation of the RF signal across the discontinuity with negligible insertion loss. The DC block comprises two break-lines with narrow gaps, patterned on the two ground planes of a slotline with each breakline connected to an RF choke. The RF chokes present open circuit nodes that prevent the RF power from leaking into the break-lines gaps. We have fabricated and tested the DC block, and demonstrated that the measured performance agrees very well with simulated results. The insertion loss was close to – 0.5 dB in the designated range of 12–16 GHz, demonstrating that the RF leakage through the DC block is indeed negligible.A compact and easy to fabricate e-plane waveguide bend
IEEE Microwave and Wireless Components Letters Institute of Electrical and Electronics Engineers (2019)